The type of vehicle normally found inside warehouses, factories and other work locations where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism situated on the front of the forklift which hydraulically lowers and raises the load. The "cat" is the protected area where the forklift driver sits.
Forklifts could carry loads which weigh between one to five tons. Several kinds could be utilized to carry shipping containers and loads that are much heavier.
The tires of a forklift must be checked and maintained regularly. The kinds of tires on various forklifts vary based on factors such as ground surfaces, frequency of use and weight of the loads. Each and every forklift operator should have access to replacement tires, a forklift jack and tire press.
Tire Maintenance Instructions
Carry out tire inspections on a regular basis. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40%, it must be replaced.
When you buy tires, be sure you buy the correct kind - pneumatic, polyurethane or solid.
When you have to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you raise the forklift high enough.
You can utilize the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and properly secure it. If you are changing more than one tire and you just have one jack, lower the forklift, and after that reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is extremely big for both in-house and mobile tire presses, the damaged tire will have to be transported to a shop which has a stationary tire press.