When using rough terrain scissor lifts, it is really essential to utilize extra caution and be completely aware of your environment so as to maintain safety. The extended booms on the machinery act as levers from the center of the drive unit. Like for example, a 6 inch bump can result in a 3 foot bounce when the driver is at the driver controls. Take into consideration all other traffic nearby, as they might not know that you are moving. Plan your assent carefully. Park the boom lift on a flat surface which has no mud or water. These areas cover deep potholes that can be possibly cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, extended to their full extension position. Be certain to only utilize wooden chalk blocks that are approved.
Several lifts will operate from the end of the boom on a metal platform. Long booms act levers on the drive unit. While you are at the driver controls, a 6-inch bump could result in a 3-foot bounce. Consider all other traffic. They may not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas can cover deep potholes wherein the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, fully. Place only approved wooden chalk blocks underneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious danger for lift operators regardless of what lift is being utilized. Like for instance, if the operator of the platform is not being aware, or if the platform is being controlled by ground personnel that is not able to correctly access nearness to wiring and hence, either the worker or the platform itself can be easily brought into contact with electrical wires. The employee could be electrocuted unfortunately unless correctly insulated.