Most of the time, companies will spend a lot of money to buy their lift trucks. It is important, therefore to take good care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures that are undertaken during maintaining and taking care of this machinery.
One of the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. Like for example, if there are any knocks or misses, the machine is defective and this must raise several concerns. Additionally listen carefully for any squealing noise that come from the belts as these noises would provide you with a wealth of information.
Several of the main components requiring attention during maintenance comprise the safety warning devices, gauges, horn, the lights and the overhead guard. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also essential to inspect the wiring.
After the above parts have been checked carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every cell of the battery should be checked so as to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The hydraulic filter, the transmission filter and the fuel filters should be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from underneath the machinery. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Next, inspect every other part of the machinery including the wheels. If any kind of fault or problem is detected, be certain to address it immediately so as to make certain the equipment is working at its safest and optimum levels.